Survey3 PRO Cable - m12(F) to USB (PWR) + TRIG + EXP
Use this m12 female (F) cable to connect to USB power and standard servo PWM trigger and relay exposure pulse connections. The GNSS (GPS) wire is available and does not have a connector installed.
We recommend USB chargers supporting up to 2.4A such as our Survey3 PRO USB Charger.
All Survey3 PRO cameras contain a 6 position (pin) m12 industrial IP67 male (M) plug. The port on the camera is male (M) and the connecting cable is female (F).
5 Meter Cable Weight: 209g
The m12 pin assignment is as follows:
| Pin Position | Wire Color | Signal Name |
|---|---|---|
| 1 | Brown | Power 5V |
| 2 | White | Ground (Power) |
| 3 | Blue | GNSS (GPS) RX |
| 4 | Black | Trigger (PWM) |
| 6 | Grey | Exposure (Strobe) |
| 7 | Pink | Ground (Signal) |
Here is a drawing showing pin position of the camera's m12 male (M) port:
USB + SERVO Plug End:
| USB Positive + | 5V Input |
| USB Negative - | Ground (Power) |
| GNSS Wire | GNSS Input (RX) |
| SERVO White | Signal |
| SERVO Red | Not Used |
| SERVO Black | Ground (Signal) |
